If you’d like to know more about both types of hydronic heating systems, contact the expert staff at warmzone.com.  They can help match your individual project with the best system at the best price. There isn’t a single system out there that is an ideal fit for every project, but there is an ideal system for every project. Also, because of the relationship that warmzone.com has with the manufacturers, they can guarantee the lowest price on the highest quality systems available.

Every available cable system is equally effective, so when determining which system to purchase, you should look at the warranty of the product, along with the ease of installation. Some cables must be embedded in a separate layer of concrete or mortar, whereas other systems can simply be installed in the thinset. Most cable systems can only be installed under tile. However, on others, if the cable is embedded in mortar or concrete, any flooring can be installed on top of the concrete. When heating smaller areas, it is nearly impossible to beat the simplicity and price of an electric cable heating system.

Even though it’s now Springtime (and forecasted high energy bills), homebuilders, househunters, and home renovators alike are looking for energy-efficient heating options for houses.  In fact, as builders and homeowners look for new ways to add value to homes in a weak housing market, they often look for upgrades that will add value and efficiency to their homes, which will help them sell.  We say they need look no further than radiant heaters for their ideal home heating solution.

In a nutshell, radiant heaters are the most efficient form of heat available in today’s market. Significantly less operating time is required to attain and maintain the desired warmth compared to furnaces and other, traditional methods of heating, which keeps operational costs to a minimum.

High efficiency boilers or electric radiant floor systems makes radiant heat one of your most efficient ways to heat your home. Combined with a well-insulated home, these radiant heater systems can quickly warm your home and then shut down or wait idle for long periods of time before being called upon by the thermostat to operate.

Radiant Heaters Tip:  Being more environmentally friendly doesn’t have to involve major renovations. Many people waste a lot of energy by not sealing cracks, doors and windows. Checking to make sure a home’s insulation is in good shape and replacing it if it’s not is another good surefire way to stop, prevent, and reverse energy waste. 

What a pain! If you or anyone in your family has asthma or dust allergies, you know all too well how miserable these ailments can make a person. Many allergy and asthma experts will advise certain changes in housekeeping habits to help alleviate allergy- or asthma-causing conditions in your home. In addition, you might consider changing your heat source to radiant heaters.

At first glance, you might not think that radiant heaters could be such a simple solution to helping keep your home healthy. In reality, radiant heaters improve the air quality, which is important, especially for anyone who suffers from either dust allergies or asthma. Not having to change air filters or clean heating ducts should also cut down dramatically on dust or other allergens in your home’s air.

Eliminating dust mites that live in your home would also go a long way towards helping keep your home healthy. Since dust mites love a warm moist environment, towel heaters and other radiant heater systems aid in maintaining a consistent room temperature and keep it moisture-free…and dust mite-free, too.  Furthermore, mold and mildew are also caused from excessive moisture especially in bathrooms with insufficient ventilation.

Radiant Heater Tip: By placing radiant heaters or a radiant heat towel rack in the bathroom you can combat the spread of germs for only pennies a day. 

When replacing a home heating system, there are a lot of questions that people have in regards to new home heating systems.  Here is a questions that was recently asked.

Q: My 1,200 square foot home used to be heated by a furnace from 1949 that ran at 25,000 BTU. Recently I changed the system to a newer, 7,000 BTU system. I thought this newer heater would be more efficient, but I find that it takes much longer to heat the house than the older system did. Is there something wrong with my furnace or do I need one that has a higher BTU?

A: It’s a good idea to replace old heating systems with newer, more efficient models. These new models can work just as well or better than old systems, but they do work differently. Where old furnaces could be turned on and heat the house within a matter of minutes, new heating systems can take longer. If you want your home to be warm at a certain time, set the heat to go on about 45 minutes prior to that.

Another important factor is whether your home is “weather-tight.” Make sure all doors and windows are properly sealed. If not, you may be losing heat at the same rate your heating system is producing it. Check with a heating contractor who can tell you whether the new unit is sized correctly for your home’s square footage.

Have you ever gone on a ski vacation for the weekend and stayed at a little ski lodge? A lot of the times, they’ll have a huge fireplace in the main room with smaller bedrooms up in the loft area or second-story. But the problem is that when you’re in the main room with the roaring fire, you’re often overwhelmed by the heat and retreat to the bedroom, where it’s far chillier. You see, many vacation or weekend homes weren’t built with air conditioning ducts with which to deliver the heat to the different rooms of the house. However, there is a solution to adding heating to homes that have not been built for traditional forced air systems: radiant heaters.

As opposed to warm air systems (such as a forced air unit heaters), radiant heaters deliver the source of heat to the floor level, not the ceiling. Radiant heaters or radiant energy is the oldest form of heating used to provide comfort and is the basis for all heating systems.

Additionally, radiant heaters also offer more comfort than forced air heating by heating the atmosphere from the ground up. Since heat rises, the heat will be more evenly distributed, providing a much more comfortable atmosphere.

Radiant Heaters Tip: Radiant energy is totally pure radiation and is absorbed by an object without physical contact with the heat source or by heating the surrounding air, as is the case with convective, forced air systems. 

Radiant Heaters Tip: If you are looking for a great way to save energy and maximize comfort in your home at the same time, then radiant heaters may be the perfect solution for you.

Danfoss offers a myriad of cables for all kinds of projects, but figuring out the differences can be pretty tricky. I won’t go into technical details here, rather go over some basic differences that will help you choose which cable to use for which project.

All of the Danfoss products give you the option of choosing between individual cable in lengths (it comes on a roll) or in woven mats, which has the cable rows pre-spaced and makes installation much quicker and easier. The only difficulty with the radiant mats is that it works best with rectangular areas; however, the mat can be cut to accommodate corners and custom layouts. (Just don't cut the heat cable!) If you have a complicated, odd shaped area to heat, you may be better off with installing the individual heating cable.